PHP 8.3.4 Released!

ファイルシステムのセキュリティ

目次

PHP は、ファイルおよびディレクトリ毎に権限を設定する多くのサーバーシ ステム上に組み込まれたセキュリティを提供します。これにより、ファイ ルシステム内のファイルを読み込み可能に制御することが可能になります。 全てのファイルは世界中から読み込み可能であり、このファイルシステム にアクセスした全てのユーザーから読み込まれても安全であることを確認す る必要があります。

PHPは、ファイルシステムにユーザーレベルのアクセスを許可するように設 計されているため、PHPスクリプトから/etc/password のようなシステム ファイルを読み込み可能としたり、イーサネット接続を修正したり、巨大 なプリンタジョブを出力したりすることができます。これから明らかにわ かることですが、読み書きするファイルを適切に設定する必要があります。

各自のホームディレクトリにあるファイルを削除する次のスクリプトを見 てみましょう。これは、ファイル管理用にWebインターフェイスを使用す る場合に通常生じるような設定を仮定しています。この場合、Apacheユー ザはそのユーザーのホームディレクトリにあるファイルを削除可能です。

例1 甘い変数の確認から生じるリスク

<?php
// ユーザーのホームディレクトリからファイルを削除する
$username = $_POST['user_submitted_name'];
$userfile = $_POST['user_submitted_filename'];
$homedir = "/home/$username";

unlink("$homedir/$userfile");

echo
"ファイルは削除されました!";
?>
username および filename はユーザーフォームから投稿可能であるため、別の username および filename を投稿して 削除すべきではない削除することが可能となります。この場合、 他の何らかの形式の認証を使用するべきです。投稿された変数が、 "../etc/" と "passwd " であった場合について考えてみましょう。簡単 なコードを以下に示します。

例2 ... ファイルシステムへの攻撃

<?php
// 外部からPHPユーザーがアクセス可能なハードドライブを削除します。PHPが
// ルートのアクセス権限を有している場合、
$username = $_POST['user_submitted_name']; // "../etc"
$userfile = $_POST['user_submitted_filename']; // "passwd"
$homedir = "/home/$username"; // "/home/../etc"

unlink("$homedir/$userfile"); // "/home/../etc/passwd"

echo "ファイルは削除されました!";
?>
こうした問題を防止するために必要な重要なチェック手段として以下の2 種類のものがあります。
  • PHP Webユーザーバイナリに制限された権限のみを許可する。
  • 投稿された全ての変数を確認する。
以下に改良されたスクリプトを示します。

例3 より安全なファイル名の確認

<?php
// PHPユーザーがアクセス可能なハードドライブからファイルを削除する。
$username = $_SERVER['REMOTE_USER']; // 認証機構を使用する
$userfile = basename($_POST['user_submitted_filename']);
$homedir = "/home/$username";

$filepath = "$homedir/$userfile";

if (
file_exists($filepath) && unlink($filepath)) {
$logstring = "$filepath を削除しました\n";
} else {
$logstring = "$filepath の削除に失敗しました\n";
}
$fp = fopen("/home/logging/filedelete.log", "a");
fwrite($fp, $logstring);
fclose($fp);

echo
htmlentities($logstring, ENT_QUOTES);

?>
しかし、これでも、傷口を塞いだことにはなりません。 ユーザーが自分用のユーザーログインを作成することをあなたの認証システムが 許可しており、ユーザーが"../etc/"へのログインを選択した場合、システム はまたも公開されてしまいます。このため、よりカスタマイズされたチェッ クを行なう方がよいでしょう。

例4 より安全なファイル名の確認

<?php
$username
= $_SERVER['REMOTE_USER']; // 認証機構を使用する
$userfile = $_POST['user_submitted_filename'];
$homedir = "/home/$username";

$filepath = "$homedir/$userfile";

if (!
ctype_alnum($username) || !preg_match('/^(?:[a-z0-9_-]|\.(?!\.))+$/iD', $userfile)) {
die(
"Bad username/filename");
}

//etc...
?>

オペレーティングシステムにより、注意するべきファイルは大きく変化し ます。これらには、デバイスエントリ(/dev/ または COM1)、設定ファイ ル(/etc/ ファイルおよび .ini ファイル)、よく知られたファイル保存領 域 (/home/、 My Documents)等が含まれます。このため、明示的に許可す るもの以外の全てを禁止する方針とする方が通常はより簡単です。

add a note

User Contributed Notes 7 notes

up
100
anonymous
18 years ago
(A) Better not to create files or folders with user-supplied names. If you do not validate enough, you can have trouble. Instead create files and folders with randomly generated names like fg3754jk3h and store the username and this file or folder name in a table named, say, user_objects. This will ensure that whatever the user may type, the command going to the shell will contain values from a specific set only and no mischief can be done.

(B) The same applies to commands executed based on an operation that the user chooses. Better not to allow any part of the user's input to go to the command that you will execute. Instead, keep a fixed set of commands and based on what the user has input, and run those only.

For example,
(A) Keep a table named, say, user_objects with values like:
username|chosen_name |actual_name|file_or_dir
--------|--------------|-----------|-----------
jdoe |trekphotos |m5fg767h67 |D
jdoe |notes.txt |nm4b6jh756 |F
tim1997 |_imp_ folder |45jkh64j56 |D

and always use the actual_name in the filesystem operations rather than the user supplied names.

(B)
<?php
$op
= $_POST['op'];//after a lot of validations
$dir = $_POST['dirname'];//after a lot of validations or maybe you can use technique (A)
switch($op){
case
"cd":
chdir($dir);
break;
case
"rd":
rmdir($dir);
break;
.....
default:
mail("webmaster@example.com", "Mischief", $_SERVER['REMOTE_ADDR']." is probably attempting an attack.");
}
up
23
fmrose at ncsu dot edu
18 years ago
All of the fixes here assume that it is necessary to allow the user to enter system sensitive information to begin with. The proper way to handle this would be to provide something like a numbered list of files to perform an unlink action on and then the chooses the matching number. There is no way for the user to specify a clever attack circumventing whatever pattern matching filename exclusion syntax that you may have.

Anytime you have a security issue, the proper behaviour is to deny all then allow specific instances, not allow all and restrict. For the simple reason that you may not think of every possible restriction.
up
19
devik at cdi dot cz
22 years ago
Well, the fact that all users run under the same UID is a big problem. Userspace security hacks (ala safe_mode) should not be substitution for proper kernel level security checks/accounting.
Good news: Apache 2 allows you to assign UIDs for different vhosts.
devik
up
9
Latchezar Tzvetkoff
15 years ago
A basic filename/directory/symlink checking may be done (and I personally do) via realpath() ...

<?php

if (isset($_GET['file'])) {
$base = '/home/polizei/public_html/'; // it seems this one is good to be realpath too.. meaning not a symlinked path..
if (strpos($file = realpath($base.$_GET['file']), $base) === 0 && is_file($file)) {
unlink($file);
} else {
die(
'blah!');
}
}
?>
up
7
cronos586(AT)caramail(DOT)com
22 years ago
when using Apache you might consider a apache_lookup_uri on the path, to discover the real path, regardless of any directory trickery.
then, look at the prefix, and compare with a list of allowed prefixes.
for example, my source.php for my website includes:
if(isset($doc)) {
$apacheres = apache_lookup_uri($doc);
$really = realpath($apacheres->filename);
if(substr($really, 0, strlen($DOCUMENT_ROOT)) == $DOCUMENT_ROOT) {
if(is_file($really)) {
show_source($really);
}
}
}
hope this helps
regards,
KAT44
up
-6
1 at 234 dot cx
18 years ago
I don't think the filename validation solution from Jones at partykel is complete. It certainly helps, but it doesn't address the case where the user is able to create a symlink pointing from his home directory to the root. He might then ask to unlink "foo/etc/passwd" which would be in his home directory, except that foo is a symlink pointing to /.

Personally I wouldn't feel confident that any solution to this problem would keep my system secure. Running PHP as root (or some equivalent which can unlink files in all users' home directories) is asking for trouble.

If you have a multi-user system and you are afraid that users may install scripts like this, try security-enhanced Linux. It won't give total protection, but it at least makes sure that an insecure user script can only affect files which the web server is meant to have access to. Whatever script someone installs, outsiders are not going to be able to read your password file---or remove it.
up
-14
eLuddite at not dot a dot real dot addressnsky dot ru
23 years ago
I think the lesson is clear:

(1) Forbit path separators in usernames.
(2) map username to a physical home directory - /home/username is fine
(3) read the home directory
(4) present only results of (3) as an option for deletion.

I have discovered a marvelous method of doing the above in php but this submission box is too small to contain it.

:-)
To Top